The Best Sodablasters Of 2022 [Top Five]

Best Sodablasters Of 2021

Soda blasting is an efficient way of removing dirt and rust from a surface, but for the best results you need the best soda blaster. Here’s how you find one. 

More and more people now know that soda blasting is great for getting rid of dirt and rust. This is why lots of people are now looking for the best soda blaster they can get. 

That’s the good news. 

The bad news is that the market has lots of with not-so-good soda blasters. 

In this article we will point you in the right direction towards the soda blasters that are actually good.

Top 5 Soda Blaster Of 2021 – Reviews

1. Buffalo Tools 40lb Soda Blaster

The Recommended Sodablaster:

With this you have enough force to actually remove the things you want to get rid of from a surface.

The point of using a soda blaster is that you now have a way of removing rust, grime, and paint gently.

You then won’t have to worry about damaging your metal or wood surface.

Why we like it:

  • Large capacity for bigger jobs
  • Wide range of pressure, ranging from 35 to 90 psi with 8.5 CFM
  • Comes with a ceramic nozzle
  • Very easy to use, and afterward you can just hose off to finish up

Our Thoughts On Buffalo Tools Sodablaster

You Can Bring It to a Work Site

This is a portable soda blaster. That means you can basically bring it anywhere, or just move it from room to room. 

It’s not too heavy at all, as it only weighs 23 pounds as is. It also measures 10 by 10 by 25 inches, so it’s not too bulky. 

You Can Use It for Big Jobs

You won’t have to keep refilling it with the soda abrasive and you can work continuously for a longer period of time. That’s the advantage of having 40 pounds of soda blaster for ammo. 

You Can Pick the Right Pressure to Use

All you need to do is to start with low pressure first. You can then increase the pressure until you can get rid of the rust and grime. With minimal pressure, you won’t have to risk damaging the work surface. Here you can go from 35 up to 90 psi, and there’s a pressure gauge.

More to Buy

You still have to buy an air compressor separately. Buy a funnel too for refilling.

2. Buffalo Tools 15lb Sodalblaster

Best For The Money

Who says you have to spend a lot for a great soda blaster?

If the 40lb version of this soda blaster is too expensive for you, then you can just go with this 15lb.

It may even be a better option for you if you’re going to use this just for small jobs. It’s even more portable than its big brother, obviously.

Our Thoughts On Buffalo Tools 15lb

You Get All the Main Features of the 40lb Model

That means you get the 8.5 CFM and the pressure range of 35 to 90 psi. You also get the same features like the ceramic nozzle, pressure gauge, and the 5-ft hose. 


At this price range, there’s just no other soda blaster that’s better. You can find comparable soda blasters at much higher prices. Why spend more?

Portable and Easy to Store

This is even easier to bring to a work site. It only measures 9 by 9 by 18 inches, and it only weighs 18 pounds. You won’t have trouble finding cabinet space to store this as well. 

More to Buy

Again, you need an air compressor. The funnel is a good buy too for easier refilling.

More Frequent Refilling

That’s understandable with the 15-pound capacity. You may even have to refill in the middle of the job for bigger jobs

3. Eastwood Soda Blaster

Best poratble sodablaster

Now, this is really portable. You can tell that at once since you have wheels and a frame for pushing it around a site.

But its portability isn’t its only notable feature. It’s actually a 2-in-1 machine, because it’s a soda blaster and an abrasive blaster.

Our Thoughts On Eastwood Sodablaster

You Won’t Have Trouble Moving This Around

That’s because you have large wheels at the bottom, and then nice push handles on top. Just push it where you want to go, and the wheels won’t be bothered by small floor imperfections. 

You Can Get More Aggressive Blasts

One main issue with soda blasting is that it may be too gentle for certain tasks. If you want a bit more force, then you can just use abrasives instead. You can then make sure to get the job done. 

Finish Large Tasks in One Go

This comes with a 50lb capacity for soda media, with a total of 100lb capacity for abrasive media. That means you probably won’t have to refill in the middle of the job. You save time, and you’re not as frustrated. 

It’s Very Easy to Use

Switching from soda to abrasives only takes a few minutes. The hose here measures 8 feet for better control, and you also have a pressure gauge. 

It’s a Bit Heavy

It weighs 45 pounds. This may not mean much when you’re rolling it around a work site. But make sure you can carry it from the trunk of your car. 

It’s Somewhat Bulky Too

You should make sure you have the storage space for this. After all, it has a 100-pound capacity.

4. RBL-145150  Sodablaster Gun

Obviously, this is just for small jobs. But for these small jobs, it’s certainly ideal.

You don’t need a huge machine that’s a problem to carry and store, and you certainly save money on this. 

It’s very easy to use too. All you need is an air compressor source (with about 2HP of power) to attach to it and the soda blasting media and you’re good to go.

Our Thoughts On RBL Sodablasting Gun

Obviously, this is just for small jobs. But for these small jobs, it’s certainly ideal. You don’t need a huge machine that’s a problem to carry and store, and you certainly save money on this. 

It’s very easy to use too. All you need is an air compressor source (with about 2HP of power) to attach to it and the soda blasting media and you’re good to go. 

It’s Easy to Carry

It only weighs 2 pounds, and it also measures just 5 inches on all sides. Portability won’t be a problem, and storage will be easy too. 

Great for Light Blasting

With this you can be sure you won’t damage the material, such as the wood furniture you’re working on. Since it’s just for light work, you don’t need to spend a lot of money either. 

Easy to Use

There’s really nothing to figure out here. Once the soda media and the air compressor are attached, you can begin the work. Point it where you want to use it. It’s also light enough that your arm won’t get tired lifting this. 

Not for Large Tasks

If you use it on a large area, you’ll have to constantly refill it. That can get frustrating.

Pros & Cons:

  • Three nozzles for versatility. 
  • Made in the USA.
  • 2-year warranty.
  • Nozzles are steel.

5. OEMTOOLS 24815 Sodablasting Cabinets

Best Sodablasting Cabinet

With this, you get a steel cabinet with an internal blasting gun to control the air flow and a built-in exhaust for smaller jobs.

It’s very efficient, and not too heavy at less than 39 pounds. For a cabinet, it’s not that bulky at 25.2 by 20 by 20.5 inches.

With this, you can get the job done efficiently and quickly.

Our Thoughts On OEMTOOLS Cabinet

You Can Keep the Abrasives Inside the Cabinet Safely

This comes with a replaceable air filter, you see. You just replace it when it’s time, and you’re good. 

You Can Expect It to Last

This is quite durable. The ceramic tip is also replaceable, so if it gets damage or worn down you don’t need a brand-new set. 

You Can Pick Your Blasting Media

Soda is great, but you’re not limited to using only soda. This cabinet can accept and recirculate most of the common types of blast media. 

You Can See What’s Happening

There’s a light inside to make things more visible during the work. It’s low-voltage, so it’s not using too much energy. 

Inadequate Packaging

Quite a few complaints were about problems that weren’t actually due to a manufacturing process. The problem was during the delivery, and the packing may not have handled it well

Soda Blaster Buying Guide – Features To Look For

So, what exactly makes a particular soda blaster good, or better than the next one?

1. Quality

It shouldn’t have any problems with its design and features, with no damage or sub-par component. Everything should work as intended. 

In fact, you need to make sure it can get rid of whatever dirt or even rust you’re planning to remove from the work object. This means you need an adjustable pressure feature as well.

2. Durability

It should work not only when you get it, but for a very long while. That means you need good-quality materials with plenty of steel. When you buy the right soda blaster, you can end up using a particular soda blaster for years to come.

3. Portability

How easy is it to bring to a work site, or even to move from one spot to another? It’s better if you can bring the soda blaster to the work site instead.

4. Capacity

You also need to think about the amount of soda media the blaster can use. If it’s too small, then you’ll end up refilling the tank in the middle of the job. But if it’s too large, then it’s bulkier and you overpay for a machine you keep using for small tasks.

Soda Blasting V/S Sandblasting

Obviously, with sand blasting you use sand as the abrasive media to get rid of dirt, grime and paint to clean a surface. 

With soda blasting, you use baking soda. However, you need to make sure you use a special type of baking soda specifically meant for soda blasting. The regular type of baking soda won’t do. 

Benefits of Soda Blasting

  • It can still get rid of paint and grease, and in some cases even rust.
  • It’s gentle enough that it won’t damage delicate materials (like glass). 
  • It can get rid of mold and make things smell better as a result. 
  • It’s water-soluble. 
  • It’s not toxic, and great for the environment. 

Drawbacks of Soda Blasting

  • You do need a bit of skill using a soda blaster to make sure you clean off the dirt and grime without damaging the material. 
  • Operational costs are somewhat comparatively higher. The soda media can only be used once, unlike sand media. 

Benefits of Sand Blasting

  • It’s more powerful, so it can get rid of more stubborn grime. 
  • You can get work done more quickly. 
  • You’re not really limited to using sand media. You can also use coconut shells or walnut shells, along with glass beads. 

Drawbacks of Sand Blasting

  • It’s almost impossible to use this powerful machine without damaging delicate surfaces. The pressures involved are just too high. 
  • It doesn’t really sanitize or deodorize. 
  • You can end up with a mess afterward.

Frequently Asked Questions –

When is it best to use soda blasting?

If you’re working on plastics, chrome, or glass, you should go with soda blasting instead of sand blasting. That’s because the soda media is gentle enough for the work, with the right amount of pressure. 

You may also want to go with soda blasting if you’re dealing with smoke damage or mold. That’s because the soda will sanitize the cleaning area, and will make it smell better too. Baking soda is actually a natural deodorizer. 

What does it mean that soda blasting is environmentally friendly?

Soda dissolves in water, but sand or glass beads won’t. This means that the soda won’t build up in residential areas or in the soil, but sand can.

Is Soda Blasting Safe?

Yes, it is. But you better wear a nice-quality gas mask to be on the safe side. It’s better to be safe, even if it’s not dangerous to breath in a little bit of baking soda while you work.

Final Thoughts

If you’re looking for the best overall soda blaster, just go with the Buffalo Tools 4lb Soda Blaster. 

It’s very well made, and you just won’t have any problems with it. The capacity is just right, and it’s easy enough to carry and store. What’s more, it really does work and it’s easy enough to use.

Frank Burtoni

Co-founder, BlastingBro

Dad of a princess. Spent half of a decade with rust and bad paint jobs. Rest of the time travelling around the world. Passionate about writing.